Anti mold glue: What is anti mold glue?

2021-11-16 17:21

  At home, we often see sealed waterproof joints in kitchens, bathrooms, and other places. After a long time, it will become moldy, yellow, black, and even shed.


  Does mold appear eye-catching in a warm, suitable, and clean home? Why does this happen? This is because long-term humid environments such as bathrooms and kitchens are prone to mold growth, coupled with factors such as dust and oil in the air. Are you still worried about mold and blackening in the kitchen and bathroom? Next, let's introduce an anti mold adhesive, which can prevent mildew.
The mold resistant adhesive is a mold resistant silicone sealant prepared with calcium carbonate as the raw material, a carbonation rate of 15% to 75%, and a resin acid soap as the filler on the surface. The surface pH value after vulcanization is 10, which can control the propagation of various molds and is widely used for decoration.
Usage of anti mold adhesive:
1. During use, the surface should be clean and dry to remove any impurities or sealant residues;
2. If necessary, cover adjacent surfaces with adhesive tape;
3. Cut the nozzle to the required size and connect it to the rubber hose to ensure good contact between the sealant and both sides of the interface;
4. Tear off the adhesive tape before curing the sealant;
5. The uncured sealant can be removed with a cloth and solvent.
Anti mold adhesive is a glass adhesive added with an anti mold agent. It can exist in various forms of glass adhesives, such as acidic and neutral glass adhesives, silicone adhesives, polysulfide sealants, and so on. As long as a suitable anti mold agent is added, it is called anti mold glass adhesive. In addition, according to national regulations, products that can control the growth of more than 5 types of mold without using fungicides are anti mold products. Now powerful anti mold products can control more than 200 types of mold.
Do not wash the sealant with water until the surface layer of the mold proof adhesive has fully solidified. The humidity and temperature of the environment will directly affect the curing time of the sealant. In high temperature and humidity environments, the curing time of silicone sealant is relatively short; If the air humidity is high, the curing time of water-based sealant is longer. Please store the sealant in a cool and dry place (0-30 ℃) to extend its service life and avoid contact with children.
The characteristics of the anti mold adhesive are as follows:
1. Neutral curing silicone sealant; 2. Wide application range, strong durability; 3. No odor during curing; 4. Mildew proof, temperature resistance, and no deformation; 5. Anti fouling, easy to clean; 6. Long lasting seal.
Neutral curing silicone sealant; Wide application range, strong durability; No odor during curing; Mildew resistant, temperature resistant, and non deformable; Anti fouling, easy to clean; Durable sealing. At the same time, adding triazolyl compounds, triazolyl compounds, compounds of zinc salts, and inorganic antibacterial agents to the mold resistant silicone sealant has the advantages of long-lasting, safe, and anti yellowing.
Generally speaking, when the surface is dry, it is not afraid of rain. Rubber surfaces from different manufacturers have different drying times. It can be cured for 3-5 mm within 6-12 hours without affecting fixation. After 12 hours, if no displacement is found after a few pushes, fixation will not be affected. It is generally recommended that a single component silicone sealant require 7 days to fully cure after use to achieve adhesion and acceptance effects.